A SERVICE OF

logo

Repair Information 87
4039-1XX
Paper Feed Rollers Removal
Note:
Replace all paper feed drive rollers at the same time.
1. Remove the lower frame.
2. Disconnect the system cable from the input sensor.
3. Remove the screws [
A
] and the outer deflector.
4. Remove the screws [
B
] and the toner shield [
E
].
5. Separate the side frames.
6. Pull the guides [
C
] out of the side frames.
7. Use a flat-blade tool to snap the gears and rollers [
D
] off the
shaft.