Working with photos
Using a memory card or flash drive with the printer
Insert a memory card into the card slot or a flash drive into the USB port
Inserting a memory card Inserting a flash drive
SD/MS-Duo/MMC
Notes:
• Insert the card with the brand name label facing up.
• Make sure any arrows on the card point toward the printer.
• If necessary, connect the memory card to the adapter that
came with it.
• Make sure that the memory card inserted is supported by the
printer. For more information, see “Supported memory cards
and file types” on page 45.
• The card reader light comes on when a memory card is inserted
and blinks when a memory card is being accessed.
SD/MS-Duo/MMC
F
L
A
S
H
D
R
IV
E
Notes:
• The flash drive uses the same port that is used
for a PictBridge camera cable.
• An adapter may be necessary if your flash drive
does not fit directly into the port.
S
D
/M
S
-
D
u
o
/M
M
C
F
L
A
S
H
D
R
IV
E
Warning—Potential Damage: Do not touch any cables, any network adapter, any
connector, the memory device, or the printer in the areas shown while actively
printing, reading, or writing from the memory device. A loss of data can occur.
The Memory Device screen appears on the display.
Notes:
• If the printer does not recognize the memory device, then remove and reinsert it.
• If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is
in the card slot, then the display prompts you to choose which memory device to use.
Printing 44
