A SERVICE OF

logo

4-4 Service Manual
5055-01x
Removals
Cover, Top Removal
1. Remove the operator panel.
2. Remove five screws from the bottom, the four screws from the
back side, and the screw from the left side.
Operator Panel Removal
1. Open the top unit and remove the toner cartridges and
photoconductor drum units.
2. Remove the operator panel.
3. Remove the two screws from the operator panel case, and
remove the case.
4. Remove the cable from the operator panel.
Service.bk Page 4 Thursday, October 4, 2001 12:20 PM