A SERVICE OF

logo

Solving finisher problems
Paper handling
Maintenance
Troubleshooting
Administration
Index
4
Printing
www.lexmark.com
Lexmark W820
Staple priming
fails.
The Priming
Failed, Retry
message displays.
See
Priming Failed,
Retry for more
information.
The staple cartridge is
empty.
Insert a new staple cartridge.
See Replacing a staple cartridge for
instructions.
The staple priming source
tray is empty.
Load paper in the staple priming source tray
specified in the Finishing Menu. See Staple
Prime Src for more information.
Bin 2 is full. Remove the stack of paper from bin 2.
The staple cartridge
holder is not installed or is
not installed correctly.
Reinstall the staple cartridge holder.
See Replacing a staple cartridge for
instructions.
The stapler is jammed. Clear the staple jam.
See Clearing staple jams for instructions.
Symptom Cause Solution