74
MESSAGES
The display messages that appear on
your ONE TOUCH
®
Profile
®
Meter
will guide you through testing proce-
dures, alert you to any problems as
they occur, and give you information
about test results stored in the meter’s
memory. This section provides you
with a complete listing of the display
messages, what they mean, and what to
do if there is a problem.
Test Procedure Messages
These messages appear during routine
testing. Follow them carefully and they
will guide you through the test.
SOLVING PROBLEMS
code10 The meter is first turned on. The code number (1–16) must match the
code number on the test strip vial or be reset.
7:26am 6-01-95
insert The meter is ready to perform a blood, check strip, or control solution test.
code 10
strip
wait The meter is performing internal checks.
please
MESSAGE APPEARS WHEN
LSC-96-003 own. manual 7/26/97 1:45 AM Page 74
