TABLE C.1 – DRIVE ROLL AND GUIDE TUBE KITS
Wire Size
4-Roll
Drive
(4-Driven)
Solid Steel Electrode
0.023” - 0.025” (0.6 mm) KP1505 - 030S
0.030” (0.8 mm) KP1505 - 030S
0.035” (0.9 mm) KP1505 - 035S
0.040” (1.0 mm) KP1505 - 045S*
0.045” (1.2 mm) KP1505 - 045S*
0.052” (1.4 mm) KP1505 - 052S
1/16” (1.6 mm) KP1505 - 1/16S
5/64” (2.0 mm) KP1505-5/64
3/32” (2.4 mm) KP1505-3/32
Cored Electrode
0.030 (0.8 mm) KP1505 - 035C
0.035” (0.9 mm) KP1505 - 035C
0.040” (1.0 mm) KP1505 - 045C
0.045” (1.2 mm) KP1505 - 045C
0.052” (1.4 mm) KP1505 - 052C
1/16” (1.6 mm) KP1505 - 1/16C
0.068” (1.7 mm) KP1505 - 068
5/64” (2.0 mm) KP1505 - 5/64
3/32” (2.4 mm) KP1505 - 3/32
7/64”
Lincore Hard Facing
(2.8mm) KP1505 - 7/64H
7/64” (2.8mm) KP1505 - 7/64
.120” (3.0mm) KP1505 - 120
Aluminum Electrode
0.035” (0.9 mm) KP1507 - 035A
0.040” (1.0 mm) KP1507 - 040A
3/64” (1.2 mm) KP1507 - 3/64A
1/16” (1.6 mm) KP1507 - 1/16A
3/32” (2.4 mm) KP1507 - 3/32A
C-1
ACCESSORIES
C-1
POWER FEED 11
* Included with K1636-1 Power Feed-11 (Europe) only.
The KP1507 series of drive roll kits contain a number of com-
ponents, in addition to the drive rolls, to optimize the wire
feeder for aluminum wire feeding. These components are
specifically designed to protect the aluminum wire from abra-
sion and deformation, thereby avoiding many common alu-
minum feeding problems.
