Black 0032
Black0032
AUTOMATION OUTPUT WHILE ARMED
◆ The factory setting causes the Console’s
Automation Output to activate when pressing
the [
(A)
] key, or when it’s triggered with a
two-button remote control.
◆ In addition, the Console can be programmed
to activate the Automation Output when the
system is armed.
AUTOMATION OUTPUT DURING EXIT/ENTRY DELAYS
◆ The factory setting causes the Console’s
Automation Output to activate when pressing
the [
(A)
] key, or when it’s triggered with a
two-button remote control.
◆ In addition, the Console can be programmed
to activate the Automation Output during the
exit and Entry Delays.
AUTOMATION OUTPUT POLARITY
◆ The factory setting causes the Console’s
Automation Output to provide a current
limited voltage source when activated.
◆ Alternately, the Console can be programmed
so the Automation Output provides a current
limited voltage source when deactivated.
REMOTE ACCESS PASSWORD
◆ This is the password used to gain access to
the Console when using the RA-2400 remote
access software.
◆ The password must be 6-digits long.
Log the remote access password in the box below.
REMOTE ACCESS PASSWORD
DURESS CODE
◆ The duress code will disarm the system, without
any special indications or sounds, but will send the
programmed duress code to the Central Station.
◆ The duress code should be two or more digits
different than any user code.
Log the duress code in the box below.
DURESS CODE
MASTER USER CODE
◆ The master user code is 1234 when power is
first applied to the Console.
◆ The master user code can be changed to any
1-5 digit code. Only the master user code can
access Setup Mode, restricted user codes
cannot.
✍
NOTE: For maximum security, a 3-5 digit code is
recommended.
Log the master user code in the box below.
MASTER USER CODE
7
PRS
3
DEF
HOME
AWAY
PROGRAMMING STEP #73
PROGRAM
STORE PROGRAM
0 FOR STANDARD TRIGGER
1 FOR OUTPUT WHEN ARMED
7
PRS
4
GHI
HOME
AWAY
PROGRAMMING STEP #74
PROGRAM
STORE PROGRAM
0 FOR STANDARD TRIGGER
1 FOR OUTPUT DURING
EXIT/ENTRY DELAYS
7
PRS
5
JKL
HOME
AWAY
PROGRAMMING STEP #75
PROGRAM
STORE PROGRAM
0 FOR VOLTAGE WHEN OFF
1 FOR VOLTAGE WHEN ON
8
TUV
7
PRS
HOME
AWAY
PROGRAMMING STEP #87
PROGRAM
STORE PROGRAM
6-DIGIT REMOTE
ACCESS PASSWORD
9
WXY
9
WXY
HOME
AWAY
PROGRAMMING STEP #99
PROGRAM
STORE PROGRAM
1-5 DIGIT MASTER CODE
(3-5 DIGITS RECOMMENDED)
9
WXY
2
ABC
HOME
AWAY
PROGRAMMING STEP #92
PROGRAM
STORE PROGRAM
1-5 DIGIT DURESS CODE
(3-5 DIGITS RECOMMENDED)
30
