38 Optional Equipment
Travis Industries 93508131 4020327
2. Lift the stove and place a piece of wood along one side to keep it elevated. Use a screwdriver to
pry out the forward knock-out underneath the stove (it is 4" wide and 2" deep).
3. Attach the stove to the pedestal with the included bolts. Tuck the included insulation underneath
the side edges of pedestal to seal off any air from entering underneath the pedestal.
4. Attach the cover plate to the front of the stove. Remove the two screws that hold the piece that
fits over the air control rod in place. Slide the air control plate in place underneath the air control
rod. Replace the piece removed from the cover plate. The cover plate should form an air-tight
seal against the air control portion of the stove (see the illustration below).
The cover plate has a clip which attaches
it underneath the air control.
Remove the two screws on the
cover plate to remove the piece that
fits over the air control rod. Then
replace the piece when the cover
plate is in place.
Air Control Rod
