181
Calculating message (left) and list of the nearest waypoints (right).
4. To see location information on the closest waypoint, press ENT and
the Waypoint Information screen appears. (If you wanted, you could
select another waypoint from the list with the
↑ or ↓ keys.)
A. To navigate to the waypoint, press
ENT. (The Go To Waypoint
command is already highlighted.) The unit will show navigation
information to the waypoint.
B. To find the waypoint, press
↓ to FIND ON MAP|ENT. The Map Page
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command
selected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press EXIT
repeatedly.
5. If you're looking by name,
there are two options: A. You can spell
out the name in the top selection box. Press
↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct
, then press ENT|ENT. B. Or you can jump
down to the lower selection list by pressing
ENT, then use ↓ or ↑ to select
