English - 40
2. Please make sure if the Capture function is set to
Continuous mode or the time for capture is set to
be long. For the related setting, refer to 7.10 I
would like to capture images of Chapter 7
Descriptions of major functions.
The images
outputted from
DC190 are too
bright, dark or
vague.
Press [AUTO TUNE] to automatically adjust to the
optimal brightness and focal length.
1. Check to see if the stored data have reached the
maximum size of the USB disk (priority) or
internal memory.
2. Please confirm the rotation angle. You may not
able to record when the image is rotated by
90°/270°.
The operating
steps in the
manual are not
applicable to the
machine.
The operating steps in the manual may be not
applicable to the machine due to improvement in
functions.Check to see if the Firmware version of your
machine is up-to-date.
1 Please go to Lumens official website to check
whether the latest version is available for update.
http://www.Mylumens.com/goto.htm
2 The steps to check the FW version are as below:
2.1 Press [MENU] on the remote control or control
panel to enter the setting menu.
2.2 Press [] or [] to select [Advanced] menu.
If you are not sure whether it is the latest version,
please consult your dealer for advice.
http://www.Mylumens.com/en/Request_form.php
How to release
the locked
machine
1. Press [Menu] on Remote Control or Control
Panel to enter the setting menu.
2. Press [] or [] to enter the [Advanced] menu.
3. Press [] to [Lock Down].
4. Press [] or [] to choose [Off], and cancel the
function of setting power-on password.
USB Audio is not supported in DC190. Therefore,
Master:DHM025 Slave:DHO010
