188 Summit Client Configuration
MX7 Reference Guide E-EQ-MX7RG-B
PEAP/MSCHAP Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config tab.
Enter the SSID of the Access Point assigned to
this profile.
Set Auth Type to Open.
Set EAP Type to PEAP-MSCHAP.
Set Encryption to Auto WEP (without WPA).
To configure PEAP-MSCHAP for WPA set
Encryption to WPA TKIP.
Tap the Credentials button.
Enter the Username or Domain\Username in the
Credentials popup text entry box.
Enter the Password. Leave the CA Certificate
Filename blank for now.
Figure 5-11 Configure a Summit Profile with PEAP/MSCHAP
Figure 5-12 PEAP/MSCHAP Credentials
Tap OK. Tap Commit.
Once successfully authenticated, copy the CA certificate into the System directory of the device.
Once the certificate file is in the System directory, enter the filename in CA Certificate Filename
on the popup Credentials data entry box.
Tap OK. Tap Commit. Perform a Warm Reset function.
The mobile device should be authenticating the server certificate and using PEAP/MSCHAP for
the user authentication.
