A SERVICE OF

logo

4. Remove the old ribbon by pulling the wire clips as shown.
5. Remove the ribbon cores from the wire clips and discard
them.
6. Place the wire clips back on the ribbon take-up reel and
delivery reel.
7. Remove the new ribbon from the package.
8. Place the full delivery core on the delivery reel as shown.
NOTE: The delivery reel feeds the ribbon in a
clockwise
direction. The ribbon take-up reel winds the
ribbon in a
counterclockwise
direction.
Wire
Clip
Ribbon
Take-up
Reel
Delivery
Reel
9401/9402 Equipment Manual
20