EDS-510A Series User’s Manual Featured Functions
3-11
NOTE
The Turbo Ring Ports and Coupling Ports will be added to all VLANs if you enable the “Turbo
Ring DIP Switch” and set Turbo Ring DIP Switch from OFF to ON.
NOTE
If you enable the Hardware DIP Switch for Turbo Ring and set the Turbo Ring DIP Switch from
ON to OFF, then the Ring Ports and Coupling Ports which are added to all VLANs are restored
to their previous software settings. (For details on how to do this, please refer to “Using Virtual
LAN.”)
System File Update—By Remote TFTP
The EDS-510A supports saving your configuration file to a remote TFTP server or local host to
allow other EDS-510A switches to use the same configuration at a later time, or saving the Log
file for future reference. Loading pre-saved firmware or a configuration file from the TFTP server
or local host is also supported for easy upgrading or configuration of the EDS-510A.
TFTP Server IP/Name
Setting Description Factory Default
IP Address of TFTP
Server
The IP or name of the remote TFTP server. Must be
set up before downloading or uploading files.
None
Configuration Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-510A’s
configuration file in the TFTP server.
None
Firmware Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-510A’s
firmware file.
None
Log Files Path and Name
Setting Description Factory Default
Max. 40 Characters The path and file name of the EDS-510A’s log file None
