Appendix A Specifications for VXI-MIO-64XE-10
VXI-MIO Series User Manual A-16
National Instruments Corporation
External input (PFI0/TRIG1)
Impedance .................................. 10 kΩ
Coupling..................................... DC
Protection ................................... -0.5 to 5.5 V when configured as
a digital signal;
±35 V when configured as an
analog trigger signal or disabled;
±35 V powered off
Accuracy............................................±1% of fullscale range
Digital Trigger
Compatibility.....................................TTL
Response............................................Rising or falling edge
Pulse width ........................................10 ns min
VXIbus Trigger
Trigger lines.......................................Supports 5 TTL and 2 ECL
trigger lines
Power Requirement
+5 VDC .............................................2.82 A typ; 3.38 A max*
(*Not including current used by
accessories.)
-5.2 VDC ...........................................0.15 A typ; 0.18 A max
-2 VDC ..............................................0.04 A typ; 0.06 A max
Power available at I/O connector .......+4.65 VDC to +5.25 VDC
at 1 A
Physical
Dimensions .......................................VXI C-size single slot
I/O connector .....................................96-pin DIN
Environment
Operating temperature........................0 to 55° C
Storage temperature ...........................-20 to 70° C
Relative humidity...............................5% to 90% noncondensing
