Nautilus NS 75X Manual

next previous

Step 2 Components:

Procedure:

ASSEMBLY

STEP 2

# Component Qty

1 Main Base Assembly 1

3 Seat Tube Assembly 1

4 Seat Handle 2

16 Seat Back Support Assembly 1

32 Hex Bolt - 3/8” x 3 1/4”L 6

33 Hex Bolt - 3/8” x 3”L 4

34 Hex Bolt - 3/8” x 2 3/4”L 1

40 3/8” Flat Washer 22

43 3/8” Lock Nut 11

Position the Seat Back Support Assembly (16) over the

rear holes of the Main Base Assembly (1) and position

next to the Connecting Tube Assembly (2). Secure parts

with hardware shown above, but do not tighten.

B. Slide the Seat Tube Assembly (3) over the Seat Back

Support Assembly (16) and the Main Base Assembly (1).

Secure parts with hardware shown above, but do not

tighten.

C. Attach the Seat Handles (4) to the Seat Tube Assembly

(3) using the hardware shown above. After the cable is

routed in Step #6

D. Tighten all hardware securely.

3/8" x 3"L

3/8" x 2 3/4"L

3/8" x 3 1/4"L