1414
1414
14
VERSION 1.0VERSION 1.0
VERSION 1.0VERSION 1.0
VERSION 1.0
2.4 Generate Profile2.4 Generate Profile
2.4 Generate Profile2.4 Generate Profile
2.4 Generate Profile
Generate Profile is the area where the user will plan the
dive and generate the first set of decompression numbers.
If this is the first time using NAUTILUS the Preferences
and Gas Set-up need to have been visited before
generating a profile. If, however, the Preferences and Gas
Setup have been completed the user can start off at the
Generate Profile tab.
2.4.1 CREATE SINGLE SQUARE PROFILE DIVE
Generating a profile with NAUTILUS is quite simple.
With the Preferences and Gas Set up already in place
enter the DEPTH of the Dive and the TIME for the dive.
Check the pull-down menu and ensure the bottom mix
desired is selected.
Press the DIVE button. This will now enter the first “leg”
of the dive. The decompression “ceiling” will be
displayed to the right of the dive button. This ceiling is
essentially the first stop.
Examples shown with 18/50 trimixExamples shown with 18/50 trimix
Examples shown with 18/50 trimixExamples shown with 18/50 trimix
Examples shown with 18/50 trimix
EAN 36% deco and 100% oxyygenEAN 36% deco and 100% oxyygen
EAN 36% deco and 100% oxyygenEAN 36% deco and 100% oxyygen
EAN 36% deco and 100% oxyygen
Square ProfileSquare Profile
Square ProfileSquare Profile
Square Profile
Illustrated in stop time.Illustrated in stop time.
Illustrated in stop time.Illustrated in stop time.
Illustrated in stop time.
