VHF NX2000 English
27
10 DSC Setting
10.1 Enter and view MMSI
If a MMSI No. has not been entered into the NX2000, the MMSI SET screen will appear
on the display every time when the unit is switched on, as below:
If you do not have a MMSI-number, you can still use the unit, but the DSC function can
not be used, and every time when the NX2000 is switched on, it will be asked to enter
the MMSI number.
Switch on the unit, then press numeric key on the fist microphone/controller to enter the
MMSI number (9-digit). This number can be obtained from your local Radio
communications authority. If a mistake is made, use the ◄ or ► key to move back and
edit the error. Then press (ENT) key, the Radio will ask for verification as below:
It is important that the MMSI entered is checked carefully, as it can only be entered
once!
Press (ENT) key once again to confirm the number and the screen will now show the
MMSI of your vessel.
To view your vessel’s MMSI, press (MENU) key on the fist microphone/controller to
select the MMSI screen, as below:
