Command dial/shift button functions
Combined with buttons listed below, the command dial and shift button provide various functions.
Button
With Command Dial With Shift Button
Metering system (
:.:
)/Slow sync
To
select metering system, rotate dial while With shift button pressed, this button is used to
button pressing Ihis button. (See page
29)
set/cancel slow sync
for
flash photography.
Exposure mode (MODE),/Automatic
To
select exposure mode, rotate dial while
With shift button pressed, this button is used
to
Balanced Fill-Flash
(~)
button pressing this button. (See page 35)
set/cancel automatic balanced Fill-Flash for
flash photography.
Film speed
(ISO)
button/Film speed
To
manually set film speed, rotate dial while
With shift button pressed, this bulton
is
used to
set
setting mode (DX/M) button
pressing this button. (See pages 23 to 24) film speed (auto for OX-coded film or manual, see
page 22)
Film advance mode
(DRIVE)
button'
To
set film advance mode, rotate dial while
-
pressing this button.
(See
page
25)
Exposure compensation
(~)
To
make exposure compensation, rotate dial
-
button while pressing this button. (See pages 52 to 53)
Auto exposure bracketing
(BKT)
See pages 54 to 58.
button
Self-timer
(
~
)
/
Rear-curtain
sync Rotate
it
to
set
self-timer operation.
With shift button pressed, this button is used
to
button (See pages 59 to 60)
set/cancel rear-curtain sync for flash photography.
-
With shift button pressed, rotate command dial for flash output level compensation.
For
details, see pages 35 to 37 on "FLASH PHOTOGRAPHY", a separate instruction book.
'Pushing MODE and
DRIVE
buttons simultaneously for more than one second sets N6000 for basic shooting.
In
the following cases, command dial can be used by itself.
In
Programmed auto exposure mode
Turn
command dial for flexible program
In
Shutter-Priority auto or Manual exposure mode
Turn
command dial to set shutter speed
7
