49
Create/Edit a New Gamma Curve Profile
1. To create a new Gamma Curve, click New.
To edit an existing Gamma Curve, highlight the profile and
click Edit.
2. To apply the curve to all four colors, select All (CMYK) [the
default]. To edit a specific color, deselect All (CMYK) and click
the individual color.
3. To modify a gamma curve, click a point on the curve and drag it to
change the shape of the curve. Or if known, enter the values in
the fields at the bottom of the screen.
4. Once the configuration is complete, fill in a name and click Save.
Important!
Remember, the Gamma Curve profile is tied to the displayed
PPD file; so the PPD file must be selected in the printer setup to
gain access to the Gamma Curve profile saved to the same PPD
file.
GammaCurve.jpg
