39
SPECIAL SETTINGS
EN
You can adjust the picture quality and store the setting you have adjusted on memory 1-5.
1 During playback, press [MODE] repeatedly to select “HD Picture Control” or “SD Picture Control”,
then press [ENTER].
“HD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480p/576p,720p and 1080i) and HDMI OUT jack.
“SD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480i/576i), VIDEO OUTPUT (VIDEO) jack.
2
Use [
K
/
L
] select a me mory from “Memory1” to “Memory5” to store your setting, then press
[ENTER].
3 Use [K / L] to select an item to be adjusted, then use [s / B] or [ENTER] to adjust the setting.
c: available ]: no t exist
*) Default setting
*1) It may take several seconds to reflect the adjusted setting.
Adjusting the Picture
BD-V
DVD-V
AVCHD
DivX
DLNA
VIDEO
Memory1
2.
1.
14.
0
+1
s
B
Auto
Contrast
Brightness
Progressive Mode
Item Adjustment range Description
Picture Control Setting
“HD Picture Control“ “SD Picture Control“
1. Contrast -7 to +7 (0*)
Adjusts the difference between the
bright and dark parts of the picture.
cc
2. Brightness 0 to +15 (0*)Adjusts the brightness of the picture.
cc
3. Sharpness -2 to +2 (0*)Adjusts the sharpness of the picture. c*1 c
4.
Gamma Correction
-2 to +2 (0*)
Adjusts the dark positions of the
picture.
c*1 c
5. ICR Red 0 to +7(0*)Adjusts the red colour of the picture.
c
]
6. ICR Blue 0 to +7(0*)
Adjusts the blue colour of the picture.
c
]
7. ICR Green 0 to +7(0*)
Adjusts the green
colour
of the picture.
c
]
8. Color -7 to +7 (0*)
Adjusts the
colour
density of the picture.
cc
9. Hue -7 to +7 (0*)
Adjusts the balance between the
green and red.
c ]
10. Noise Reduction Off*, 1to 3
Reduces noise in the luminance
signal and chroma signal.
cc
11. MPEG NR Off*, 1to 3
Reduces block noise and mosquito
noise.
c ]
12. Edge Enhancer
Off*, Soft, Middle, Strong
Emphasises the edge of the picture.
c
]
13. Qdeo True Color Off*, Low, Middle, High
Adjusts the smoothness of the
picture. It is available for 10 or 12 bit
display.
c ]
14.
Progressive Mode
Auto*, Video
Selects the setting of the progressive
scan.
c ]
Note
•The setting remains even you turn the unit into the standby mode except unplug the AC cord.
• For DivX® files, noise reduction is not effective.
• ICR is the abbreviation of Intelligent Color Remapping.
• Qdeo True Color Processing (QTC) dynamically expands 8-bit video to
use the full dynamic range offered by 10 and
12 bit displays, eliminating contours while preserving detail.
• Qdeo True Color is adjustable and effective when this unit is connected with the display device which is compatible
with Deep Color.
