A SERVICE OF

logo

Getting Started
1-9
S Slide the ribbon cassette (3) into the printer.
S Close the rear cover (2) and lock the printer (Press ).
1.7 Replacing the Ribbon Cassette
Caution: The print head may be very hot immediately after printing!
S To install the ribbon, the printer must be powered on.
S Put the printer into the Local Mode. (Press ).
S Unlock the rear cover (2). (Press ).
S Open the rear cover (2) of the printer by pressing simultaneously the two
lokking buttons, see picture on page before.
S Swivel the rear cover backwards.
S Remove Ribbon Cassette.
For further steps see chapter 1.6 Ribbon Installation.