2.3. Repacking
Prepare the unit before shipping.
Note:
It is highly recommended that users keep the original carton and ALL packing materials. Please follow these instructions when
transporting or shipping the printer.
· The printer weights about 10 kg {22 lbs}.
· Please use the original carton and all of the original packing materials.
· Improper repacking of the printer may result in a service charge to remove spilled toner.
· Since the printer uses dry toner, extreme care must be taken when handling. The printer should be handled in the upright
( vertical ) position.
· Do not ship with drum unit installed in printer.
Material Required
− − Original cartons and packing materia ls
− − Newspaper or drop cloth
− − Shipping tape and scissors
(1) Turn off the printer, remove the power cord and all interface
cables.
(2) Open the front cover.
(3) Lift the drum unit up ( 1 ) and slide it out of the printer ( 2 ).
· To avoid possible toner spillage, it is recommended to
place the drum unit on newspaper or a drop cloth.
Caution:
· To prevent any damage to the drum unit, observe
the following precautions;
− − Do not touch the black drum surface illustrated
below.
− − Do not expose the drum unit to light for more
than 5 minute s.
− − Do not expose the drum unit to direct sunligh t.
− − Do not keep the drum unit near dust or dirt.
− − Do not place the drum unit in a high humid area.
26
KX-P7105 / KX-P7110
