Preparation
10
1 Press the notch on the handset
cover firmly and slide it in the
direction of the arrow.
2 Insert the batteries negative (T)
end first. Close the handset cover.
Note:
L When replacing batteries, remove the
old batteries.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
When charging, “Charging” will be
displayed.
When the batteries are fully charged,
“Charge Completed” will be
displayed.
*1 KX-TG7202
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is subject to the
exposure of grease, dust, or high
humidity.
Rechargeable Ni-MH ONLY
Base unit Charger
*1
TG7200-7220HK(e-e).book Page 10 Tuesday, September 4, 2007 9:29 AM
