A
CD selection and care
With this system, you can only play CDs having this mark.
(
A
)
Note on CD-R and CD-RW
This unit can play CD-R and CD-RW recorded with CD-
DA or WMA/MP3. Use an audio recording disc for CD-DA
and nalize* it when you nish recording. The unit may
not be able to play some discs due to the condition of the
recording.
*
A process performed after recording that enables CD-
R/CD-RW players to play audio CD-R and CD-RW.
Do not;
l
use irregularly shaped CDs. (
B
)
l
attach extra labels and stickers.
l
use CDs with labels and stickers that are coming off or
with adhesive exuding from under labels and stickers. (
C
)
l
attach scratch-proof covers or any other kind of
accessory.
l
write anything on the CD.
l
clean CDs with liquids. (Wipe with a soft, dry cloth.)
l
use CDs printed with label printers available on the
market.
To prevent damage
Always observe the following points.
Set the system on a at, level surface.
l
Do not set it on top of magazines, inclined surfaces, etc.
l
Do not move the system while tray is opening/closing, or
when loaded. Always unload all CDs before moving the
system.
l
Do not put anything except a CD in the tray.
l
Do not use cleaning CDs or CDs which are badly
warped or cracked.
l
Do not disconnect the AC power supply cord from the
household AC outlet during CD changing operation.
B
Setting the time
This is a 12-hour clock.
The example shows how to set the clock for 2:15am.
1 Press [8] to turn the unit on.
2 Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
CLOCK zPLAY zREC
Original display
3 Within 7 seconds:
Press [u 2/REW] or [i 1/FF] to set the
time.
Press and hold to change the time faster.
4 Press [CLOCK/TIMER].
The time is set and the original display is restored.
Displaying the clock:
Press [CLOCK/TIMER].
The clock is shown for about 5 seconds.
Note
The clock may lose or gain some time over a period.
Readjust if necessary.
