8
Power Supply
ª Using an AC Adaptor
1
Connect the DC Input Lead to the
[DC IN 4.9V] socket on the SD Mobile
Printer.
2
Connect the AC main Lead to the AC
Adaptor and the AC Outlet.
≥Hold down the Power Button [ ] for about 2
seconds, and the printer is on.
ª
Using the Battery
1
Attach the Battery 1 to the Battery
Holder on the SD Mobile Printer 1 and
slide it forward until it locks with a
click. 2
2
Connect the AC mains Lead to the AC
Adaptor and to an AC Outlet. (Refer to
the description above.)
≥The [ON] Lamp flashes.
3
Leave them as above until the Power
Lamp [ON] goes off.
≥When recharging is completed, the
[ON] Lamp
goes off.
≥Remove the AC Adaptor to use the Battery.
The SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT AND
SHALL BE EASILY ACCESSIBLE
.
DC IN 4.9V
DC IN 4.9V
1
1
2
1
2
