17
Printer setting
Using this Printer, you can print an image stored on the personal
computer. Here described is a method to set the Printer Driver from the
Start Menu. Image processing software may also be used for a similar
setting. (Some software types may not provide the setting procedure.)
Set the Printer Driver before printing. (Image processing software is not
supplied. Please purchase one separately.)
1
From the [Start] menu, Select [settings] >> [Printers (and
Fax)].
2
Right-Click the [Panasonic SV-P10] icon and select
[Properties].
≥Printer driver’s dialog box appears.
≥The Properties screen may be shown differently depending on the
environment.
3
Click on the [Paper] tab, then Select [Portrait] or
[Landscape] to set the Print direction.
4
Click on the [Device Options] tab, then click the [
«
] mark
in the setting box [Image control] to select [1 frame] or
[4 frames].
≥If [4 frames] is selected, the paper is split into four frames, each of
which will have the same image.
5
Click the [OK] Button.
≥The setting is completed.
≥If you print an image from the image processing software, proceed to
printing from the menu after the setting is completed. When [Panasonic
SV-P10-USB00X]
1
is displayed, insert a sheet of paper.
≥To abort printing, click the [Abort] Button. During printing, the print
action stops after the completion of current image printing.
≥Please read [Readme] before starting to use.
≥Setting up from the [Graphics] tab will not affect any actual prints.
≥Whatever the setting is made on the Printer, the setting on the personal
computer takes priority.
≥Some software may not provide correct printing. (For details, read the
manual for the software.)
1
2
3
4,5
1
