A SERVICE OF

logo

Open as PDF
next previous
32
Step 16: DSL Router Webpage will show as below:
4.5 Setup ADSL Router via USB Cable on Linux
This driver supports Linux-2.4 kernel.
Compiling the Driver
To compile the driver simply run make in "viking" directory. This will create binary driver
with name VKGEther.
% make
Loading the module
To load the VKGEther module enter the following command as root in directory "viking"
Syntax:
% insmod ./VKGEther {Module Options}
Unloading the module
To unload an unused module:
% rmmod VKGEther
You will need to exit or disconnect any program currently using the module before it
unload. If the module was configured for LAN, shutdown the ethernet interface:
% ifconfig eth1 down
The ethernet interface associated with the VKGEther driver was "eth1" that's why