![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/56/c56a7f0c-3b38-4a0c-a78a-dd4ad6603a3b/c56a7f0c-3b38-4a0c-a78a-dd4ad6603a3b-bg4.png)
4 of 20
ISSUED: 10-01-07 SHEET #: 095-9272-2 06-15-09
Installation to Solid Concrete and Cinder Block
Level and use wall plate as template to mark center
of holes.
F) in
AA)
over anchor and secure with wood screws (D). Make
sure wall arm is level, and tighten all fasteners.
D
AA
F
1
solid
concrete
cinder
block
1
3
2
F
Drill holes and insert anchors (F).
Place plate (AA) over anchors (F) and secure with screws (D).
Tighten all fasteners.
AA
F
D
concrete
surface
concrete thickness in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount
hammer drill to avoid breaking out the back of the hole when entering a void or cavity.
and components.
WARNING
but do not overtighten
screws, greatly reducing their holding power.
directly
to load-bearing concrete.
concrete covered with plaster, drywall, or other
shown below. Be sure concrete anchors do not
pull away from concrete when tightening screws.
custom fasteners must be supplied by installer (not
evaluated by UL).
WARNING
CUTAWAY VIEW
INCORRECT CORRECT
wall
plate
wall
plate
dry wall
dry wall
concrete
concrete