A SERVICE OF

logo

INSTALLATION
EATON Powerware
®
9135 Two−in−One UPS (5000/6000 VA) User’s Guide S 164201726 Rev 1
www.powerware.com
23
UPS Setup
The Powerware 9135 UPS is designed for flexible configurations and can
be installed in a rack or as a standalone cabinet.
If you are installing the UPS in a rack, continue to the following section,
Rackmount Setup;" otherwise, continue to Tower Setup" on page 30.
Rackmount Setup
The rail kit can be mounted in 19-inch panel (48 cm) racks from 24 to
30 inches (61 to 76 cm) deep and includes:
S Left and right sliding rail assemblies
S (20) M4 6 mm Phillips
®
flat−head screws
S (4) M4 10 mm Phillips round−head screws
S (4) M6 12 mm Phillips round−head screws
S (8) M6 12 mm Phillips flat−head screws
S (2) mounting brackets
S (2) rear hold−down brackets