PRINTER CONFIGURATION
46
Forms Menu
Most form printing applications use several different forms such as packing
lists, bills of lading, invoices, checks, and green bar paper for reports. Not
all of these forms require the same printer settings for things such as font,
character size, line spacing, or form length. The FormsPro 4000se series
printers store up to ten complete sets of form parameters, including the
name of the form. These ten sets of parameters, or “forms”, are
permanently stored in the printer’s memory and are referred to as “Form
0” through “Form 9”. These forms can be accessed from a single button
on the printer’s control panel or by a command sent from the host
computer.
To access the FORMS MENU, enter Setup by pressing the SETUP button.
After the “Entering Setup Menus” message has been displayed,
the following will appear.
FORMS MENU
Form 0
Note: The actual form number will be for the form that was active
prior to entering Setup. To select a different form, press
either of the VALUE buttons until the desired form is
displayed. Next press either of the FUNCTION buttons to begin
displaying the various items for that form. The items
available for each form are described on the following pages.
The factory default values are indicated with an asterisk (*)
in this manual (the asterisk does not appear on the printer’s
display).
Forms Menu Items
Form Name
Form Name
FORM 0
Possible Values: Up to 16 characters of A through Z,
Space, 0 through 9
