A SERVICE OF

logo

Open as PDF
next previous
Getting Started
Printer Features
Before preparing your new FieldPro RT43 for use, please refer to
Figure 1 and familiarize yourself with the
locations of the various features of the printer.
Paper Doo
r
Tear Ba
r
Paper Doo
r
Release Lever
Battery
Control Panel
Carrying Strap
Power Connecto
r
Universal Port Cove
r
Right Side
Of Printer
Figure 1 - Printer Features
Battery Installation and Charging
The battery for your FieldPro printer is shipped in an “uncharged” state. The battery must be charged using the
following instructions prior to using the printer for the first time. Maximum battery capacity is not reached
until after completing a minimum of three complete charge and discharge cycles.
Please refer to
Figure 2. Install the battery by first placing the end of the battery where the battery contacts are
located into the printer, and then press down on the end where the release lever is located until the lever “snaps”
into place.
3