replacing printer consumables
Operator’s Guide26
5 Tap the toner bottle several times to
loosen toner.
6 Close the developer unit cover.
Press until you hear a “click” which
indicates that the developer unit is
closed completely.
note
It
is not necessary to replace the waste
toner bottle or fuser felt if the toner that was
last added was toner from a starter toner
bottle.
caution
Failure to replace the waste toner bottle,
after using a standard toner bottle, can
cause a toner overflow, requiring a
service call to properly clean the printer
.
7 Replace waste toner bottle and
fuser felt if it is 2/3 full, or more.
8 Close the printer top cover.
note
Some
software stops communicating with
the printer if the printer is offline for more
than two minutes. In this case, you may
need to restart your print job.
