Tsunami QuickBridge II T1/E1 Quick Install Guide
Copyright © 2005 Proxim Corporation. All rights reserved. 3
STEP 2. UNPACK THE SHIPPING BOX CONTENTS
The product’s shipping boxes should be left intact and sheltered until arrival at the installation site. Carefully
unpack the Tsunami QuickBridge II shipment and check for any shipping damage or missing parts. There are
two sets of equipment in the box, as displayed in the following figure.
The Tsunami QuickBridge II T1/E1 Quick Install Guide and a Documentation and Software CD also are included
in the shipment. (Extra screw-on caps to seal unused connector ports are also provided.)
Contact Technical Support regarding any missing or damaged parts.
Notes:
(1) If the shipping container shows signs of damage, immediately notify the transportation company. Upon
receipt, inspect contents to ensure no parts are missing or damaged.
(2) Save the original shipping boxes to re-use for shipping the equipment back to the factory, for storage, or for
re-shipping the equipment to another location.
