83
Serial Adapter Version Report
Purpose: This packet is generated by the Serial Adapter in re-
sponse to a Request Serial Adapter Version command. The
packet contains the 4-byte IP address of the Serial Adapter, along
with the Version string and a code indicating the radio type.
Message Format:
BYTE response (ASCII ‘v’, 76H)
BYTE seqno (from original command)
BYTE IPaddr H ;Serial Adapter’s IP Address
BYTE IPaddr 3
BYTE IPaddr 2
BYTE IPaddr L
7 BYTES string (7 byte ROM version number string)
BYTE Radio Type(03= RangeLAN2 Extended Range)
Standby Confirmation
Purpose: This packet is generated by the Serial Adapter after a
Go To Standby command is received from the External Com-
puter. Immediately after generating this response, the Serial
Adapter enters standby mode. The Serial Adapter can only be
removed from standby mode by asserting the RTS input signal.
Message Format:
BYTE response (ASCII ‘g’, 67H)
Initialization Confirmation
Purpose: This packet is generated by the Serial Adapter after an
Initialize Serial Adapter command is received from the External
Computer. For convenience, the packet contains the physical
address of the Serial Adapter.
