A SERVICE OF

logo

Page 15
7006-188G
R
Cumberland Gap
Wood Stove
BENDING TEMPLATE
STRAIGHT END
CUT ENDS
Cut Ends
Hand Bend #1
Cut Ends
Straight End
Hand bend #2
Lay the at diverter on the
template with the cut ends
at the bottom of the tem-
plate.
HAND BEND #1
Bend the diverter to match
the same degree bend as
in the template.
HAND BEND #2
Bend the diverter 90° to
complete the process.
Place diverter on tem-
plate to con rm the bends
match the template.
Baf e Diverter
is shipped
inside rebox.
WARNING
Fire Risk.
Required on all rear horizontal installations.
Excessive smoke or ame spillage into the
room may occur.