A SERVICE OF

logo

Open as PDF
next previous
16
2. Using a flathead screwdriver, carefully lift out the
plastic tongue holding the sun visor clip and bracket
holder together, then slide the sun visor clip out of
the bracket holder.
WINDSHIELD MOUNTING
The supplied windshield bracket and holder let you
quickly mount the detector on your vehicle’s wind-
shield.
Note:
Some vehicles have a soft plastic coating on the
inside surface of the windshield. The windshield
bracket’s suction cups can cause permanent marking
on this kind of windshield.
1. Slide the windshield bracket assembly into the
bracket holder along the groove on the bracket
holder.
2. Snap the bracket holder into the radar detector’s
track.
22-1676.fm Page 16 Friday, August 6, 1999 10:38 AM