11
1
Quick Setup Guide
Quick Setup
Guide
1.3.3 Universal Serial Bus Ports
USB 2
USB 1
1 VCC
3 D3-
5 D3+
7 GND
9 GND
2 GND
4 GND
6 D2+
8 D2-
10 VCC
USB 3 and
USB 4
J15
J16
J16
1 VCC
2 D2-
3 D2+
4 GND
J15
Depending on the type of USB port cable that you are using, the J15/J16
connector on the system board allows you to connect the optional 3rd
and 4th USB ports.
Insert the USB port cable connector only to J15 if:
Pins 1 and 10 of the cable connector is VCC (red colored edge of the
cable); or
None of the holes on the cable connector is plugged, meaning the
cable connector has no keying mechanism.
Insert the USB port cable connector to pins 1-3-5-7-9 of J15 and pins
1-2-3-4 of J16 if:
One of the holes on the cable connector is plugged, meaning the cable
connector has a keying mechanism; or
Pin 1 of J15 and pin 1 of J16 is VCC (red colored edge of the cable).
The Wak e-On-USB Keyboard function, when enabled, allows a USB
keyboard to wake up a system that is in the S3 (STR - Suspend To RAM)
state.
