Roland JUNO-Gi Manual

A SERVICE OF

next previous

107

Overview

Appendix

USB Memory

Song Player

Digital Recorder

Synthesizer

Selecting Sounds Perform. Functions Editing/Eects Other Settings

Rec/Play/Edit Eects Rhythm Pattern

Editing the Insert Eects Settings

(EDIT)

If you want to create a new eect sound, start by selecting an existing

patch that’s close to the sound you want, then modify (edit) the patch

settings. If you want to save the eect settings you’ve edited, save the

patch as a user patch or song patch.

1. In the recorder’s eects screen, press the [1] (INS FX) button.

The INSERT FX screen will appear.

2. Use the cursor buttons to move the cursor to each algorithm

of the patch.

3. Press the [5] (EDIT) button.

The INSERT FX EDIT screen will appear.

MEMO

You can switch between algorithms in the edit screen by holding

down the [SHIFT] button and using the cursor [

] [ ] buttons.

Entering a value

4. Use the cursor buttons to move the cursor to the parameter

that you want to edit, and use the VALUE dial or the [DEC]

[INC] buttons to edit the value.

For details on each parameter, refer to “Insert Eects Parameters” (p. 109).

5. If you want to save the current eect settings, press the [6]

(WRITE) button.

For the save procedure, refer to “Saving Insert Eects Settings (WRITE)”

(p. 107).

When you’ve nished editing

6. When you’ve nished editing, press the [EXIT] button.

Saving Insert Eects Settings (WRITE)

Here’s how to assign a name (patch name) to the eect settings you’ve

edited, and save them as a new eect patch.

1. In the INSERT FX EDIT screen, press the [6] (WRITE) button.

The INSERT FX PATCH NAME screen will appear.

2. Assign a name.

For details on how to enter a name, refer to ”Assigning a Name” (p. 19).

3. When you’ve nished assigning a name, press the [6] (NEXT)

button.

A screen will appear, allowing you to select the save destination.

4. Press the [1] (USER) or [2] (SONG) button to select the

save-destination group.

Group Explanation

USER Patches saved in internal memory

SONG Patches saved for each song

5. Use the cursor buttons to move the cursor, and use the

VALUE dial or the [DEC] [INC] buttons to select the bank

and patch number into which you want to write your edited

patch.

6. Press the [6] (WRITE) button.

A conrmation message will appear.

7. Press the [5] (EXEC) button to write to the patch.

To cancel, press the [6] (CANCEL) button.

NOTE

• Never turn o the power while saving is in progress.

• You can’t save eect patches while recording or playing a song.