A SERVICE OF

logo

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- Users Manual
-20-
Please follow below to form a logical network using the Utility:
1. Connect Device A to the network card of a PC.
2. Open the Utility. The Main tab page displays information about Device A
after connection succeeds.
Search for Local device on your computer
3. Click the Privacy tab page. Enter a name in the Private Network Name
field.
Setting the network name for your PLC
4. Click Set Local Device Only. When the following page is displayed, the
setting succeeds. Now Device A has been removed from its logical
network.
Network name setting success
5. Repeat the procedures above to configure Device B. Configure Device