This chapter provides step by step information on setting up
your printer. Topics included in this chapter are:
◆
STEP 1
: Unpack Your Printer
◆
STEP 2
: Install the Toner Cartridge
◆
STEP 3
: Load Paper
◆
STEP 4
: Connect to the Computer with a Parallel Cable
(ML-1210 Only)
◆
STEP 5
: Turn on the Printer
◆
STEP 6
: Print a Demo Page!
◆
STEP 7
: Install the Printer Software
◆ Installing Software from Diskette
2
2
Unpack Your Printer
1
Remove the printer and all accessories
from the packing carton. Make sure that
your printer has been packed with the
following items:
Toner cartridge
Power cord
Paper Output Support
CD-ROM*
USB Cable
(ML-1220M Only)
2
Carefully remove all packing tapes from
the printer.
3
Attach the supplied paper output
support as shown.
Setup Guide
Notes:
• If any items are missing or damaged,
notify your dealer immediately.
• Components may differ from one
country to another.
• The CD-ROM contains the printer
driver, the User’s Guide, the Adobe
Acrobat Reader program and the Make
Your Own Diskette setup software.
