2.18
Receiving a Fax
Receiving Automatically in FAX Mode
1. Press Rcv.Mode until the display shows ÔFAX.Õ
2. When you get a call, the machine answers the call on the default
ring and receives a fax automatically. You can change the number of
rings.
To adjust ringer volume, press Menu, System Setup on the one-touch
keypad, Enter to access the ringer volume mode, then use
¹
or
to
choose the desired loudness.
Receiving Automatically in TEL/FAX Mode
1. Press Rcv.Mode until the display shows ÔTEL/FAX.Õ
2. When you get a call, the machine answers the call on the default
ring and receives a fax signal automatically. You can change the
number of rings.
If the machine does not sense a fax signal, your machine will give
another ringing tone to tell you it is a phone call.
3. Lift the extension phone to answer the call. If you do not pick up
the extension phone within a specified time, the machine will switch
to automatic fax reception mode.
Note: If your machine is not equipped with handset, youÕll pick up the
handset of the extension phone connected to EXT.LINE jack. In the
case, pick up the handset, then press
Stop
.
