I ENGLISH I
Preparation
*:* Use the SB-LSM80 or SB-LSM160 (not supplied) Battery Pack only.
*:o The Battery Pack may be charged a little at the time of purchase.
Charging the Lithium Ion Battery Pack
1. Turn the [Power] switch to [OFF].
2. Attach the Battery Packto the DVD Camcorder.
3. Connect the AC Power adapter(AA-E9 TYPE) to a walt socket.
4. Open the DC IN Jack Cover.
5. Connect the DC cable to the DC INjack on the DVD Camcorder.
= The charging indicator will start to blink, showing that the Battery
is charging.
6. When the Battery is fully charged, disconnect the Battery Pack and
the AC Power Adapter from the DVD Camcorder. Even with the
Power switched off,the Battery Pack will still discharge.
Blinking time Charging rate
Once per second _ess than 50%
Twice per second 50% ~ 75%
Three times per second 75% ~90%
Blinking stops and stays on 30% ~ 100%
On for a second and off for a Error - Reset the Battery Pack and
second he DO Cable
<Charging indicator>
