11
Getting Started
10
Press PWR to turn the phone on and off.
Press the Volume button to:
• adjust voice volume during
conversation.
• adjust ring volume in Standby mode,
• scroll Call Logs, Phone Book entries,
and menu options.
• mute the ringer during an incoming call.
Status Indicators
Signal Strength
Indicates current signal strength.
No Service
Indicates that the phone is outside a
service area and cannot send or receive
calls.
Roaming
Displays when the phone is outside the
home service area but within the
network.
Message
Indicates a voicemail notification
(VMN), page, or text message.
Digital
Indicates a Digital mode.
Vibrate
Indicates a Vibrate mode.
Battery Charge
Indicates the battery charge level.
Display Messages
Messages appear on your display at various times. For
a listing and explanation these messages, refer to
Appendix A.
Battery
Your phone package includes a partially charged
rechargeable battery so that you can use the phone
immediately after it is activated.
Installing the Battery
To attach the battery to your phone:
1. Hold the battery so that the metal contacts on the
base of the battery line up with the metal
contacts on the base of the phone.
2. Place the battery on the back of the phone with
the top of the battery about a quarter of an inch
from the latch.
3. Gently slide the battery toward the top of the
phone until it snaps into place.
Removing the Battery
Make sure to turn the power off before removing
the battery. Then press the battery release button
while sliding the battery out of position.
SCH-400(E-US/62~3-) 7/15/99 10:08 AM Page 10
