Section 2
Section 2
Placing And Receiving Calls 4544 Placing And Receiving Calls
Placing A Call
Dialing Manually:
You can dial a phone number directly from almost every screen on your Jitterbug.
1. When you open your Jitterbug, you will hear a dial tone to indicate that service is
available. If service is not available, there will be no dial tone and you will see “No
Service” on the Inside Display.
2. Dial the full ten-digit number using your keypad. You may be required to dial
the number “1”rstbeforeplacingacallinsomeareas.
3. Press the button to place the call.
If you accidentally press a wrong button, press the button to back up and
delete the last number.
There are three screens where you cannot dial a phone number: (1)
when typing a Text Message, (2) when entering a new name and number
into your Phone Book using your keypad and (3) when using Voice Dial.
Using An Operator To Make A Call:
A live Operator can connect you to anyone in your Phone Book or to any number
in the U.S. or Canada.
1. Press the button on your keypad.
2. Press the button when you see “CALL?” at the bottom of the Inside
Display.
3. “Calling Operator” will appear on the Inside Display followed by the words
“Connected...”
