Copying
88
2
Duplex
The optional Duplex unit is required to use this function.
Thisfunctioncanbeusedintwo
ways:
❖
❖❖
❖
1Sided
→
→→
→
2Sided
This mode makes two-sided copies
from one-sided originals.
❖
❖❖
❖
2Sided
→
→→
→
2Sided
This mode makes two-sided copies
from two-sided originals.
Limitation
❒ You cannot use the following copy
paper with this function:
• Paper smaller than A5
K
,5
1
/
2
"
× 8
1
/
2
"
K
(possible on A5
L
,
5
1
/
2
" × 8
1
/
2
"
L
)
• Paper thicker than 90g/m
2
,24
lb.
• Paper thinner than 64g/m
2
,20
lb.
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Postcards
❒ You cannot use the bypass tray
with this function.
❒ The function might not work for
certain types of large size originals
(such as A3, 11" × 17"). In this case,
an optional 32MB memory or
HDD is required.
1Sided
→
→→
→
2Sided
Note
❒ If you set an odd number of 1-sid-
ed originals in the document feed-
er, the reverse side of the last page
is left blank.
❒ When original images are copied,
the images are shifted by the width
of the binding margin. You can ad-
just the binding margin or binding
position. You can also change their
default values. ⇒ "Front Margin:
Left/Right ", "Back Margin:
Left/Right", "Front Margin:
Top/Bottom " and "Back Margin:
Top/Bottom" on p.194 “Edit
1
/
2
”
❒ By default, a binding margin is
made on the back side. You can
change the value of this setting. ⇒
"1 sided → 2 sided Auto Margin: T
to T" on p.194 “Edit
1
/
2
”
12
2
1
