Operating a delegate unit
4 | ADN C1/ADN D1
Operating a delegate unit
Taking the floor/Making a request to speak
If the conference mode is set to “Direct Access” or “Override” (for fur-
ther information, refer to the detailed instruction manual for the over-
all system “ADN Conference System”):
̈ Press the microphone key ¶.
Your microphone switches on and you can take the floor immedi-
ately. The microphone LED º and the signal light ring · light up
red. The loudspeaker ¾ is muted. Depending on the conference
mode and the speaker limit set, the microphone of the previous
speaker will be deactivated.
If the conference mode is set to “Push To Talk”:
̈ Press the microphone key ¶ and keep it pressed for the duration
of your contribution.
Your microphone switches on and you can take the floor immedi-
ately. The microphone LED º and the signal light ring · light up
red. The loudspeaker ¾ is muted.
If the conference mode is set to “Request”, you have to be granted
speaking privileges:
̈ Press the microphone key ¶.
Depending on the setting adjusted in the operating menu (for fur-
ther information, refer to the detailed instruction manual for the
overall system “ADN Conference System”)
– the microphone LED º flashes green and the signal light ring ·
flashes red or
– only the microphone LED º flashes green.
When the chairperson grants you speaking privileges, your micro-
phone is activated. The microphone LED º and the signal light
ring · light up red. The loudspeaker ¾ muted. Depending on the
conference mode and the speaker limit set, the microphone of the
previous speaker will be deactivated.
KA_ADN-DUs_xxxxxx_0911_SP13.book Seite 4 Mittwoch, 31. August 2011 1:32 13
