13
Using the radio microphone
To switch the radio microphone off:
̈ If necessary, deactivate the lock mode (see page 14).
To switch the radio microphone on and to deactivate the
RF signal on switch-on (offline operation):
To activate the RF signal:
You can switch the radio microphone on and deacti-
vate the RF signal on switch-on. For more informa-
tion, see next section.
̈ Keep the ON/OFF button ¹ pressed until “OFF”
appears on the display panel. The red ON LED ¾
goes off and the display panel turns off.
When in the operating menu, pressing the ON/
OFF button ¹ will cancel your entry (ESC function)
and return you to the current standard display.
̈ Keep the ON/OFF button pressed until “RF Mute
On?” appears on the display panel.
̈ Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon ብ is not displayed.
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
̈ Briefly press the ON/OFF button. “RF Mute Off?”
appears on the display panel.
̈ Press the multi-function switch.
The transmission icon ብ is displayed again.
ON/OFF
ON/OFF
MHz
533.875
ew100 G3
MUTE
P
AF
ብ
ON/OFF
