6-3Q&A
Users Manual CX2
Occasionally I cannot print
1. If a DHCP/BOOTP server or RARP server resides on the network, the IP addresses
are assigned automatically, which may rewrite the IP address that you have manually
assigned to the PRICOM C-6400W. To avoid this problem, tick off Use DHCP/BOOTP
check box and configure the IP address again.
I cannot print in LPR
1. LPR printing cannot be used with the Canon printer. Refer to our web page in more
information.
How can I return to factory default?
1. Factory default is restored by holding down the push-button switch for 15 seconds while
powering up.
I cannot use the BJ print monitor
1. If you can use the LPR function of Windows 2000, Windows XP you cannot use the
monitor function of Canon print driver.
2. Old Canon printer drivers may not have BJ status monitor function, download the latest
Canon driver from Canon web page.
3. The PRICOM C-6400W may not support to BJ status monitor, refer to our web page.
4. If you can use BJ status monitor click Start - Program - BJ laser printer - BJ Printer
Monitor in Windows and select manual, or automatic mode.
I cannot configure in the AdHoc mode
1. You can change to infrastructure mode by using the push-button switch.
If you want to change to infrastructure mode, refer to 2, PRICOM C-6400W - Start in
Infrastructure mode.
