23
Troubleshooting & Repair
WARNING
Any procedure other than the preceding could
result in: (1) personal injury caused by elec-
trolyte squirting out the battery vents, (2) per-
sonal injury or property damage due to battery
explosion, (3) damage to the charging system of
the booster vehicle or of the immobilized vehicle.
Do not attempt to jump start a vehicle having a
frozen battery because the battery may rupture
or explode. If a frozen battery is suspected,
examine all fill vents on the battery. If ice can be
seen or if the electrolyte fluid cannot be seen, do
not attempt to start with jumper cables as long
as the battery remains frozen.
Figure 24. Jump Starting Diagram
BULB REPLACMENT
Dash Indicator Bulbs
1. Raise the hood and remove the plenum.
2. To remove a bulb, turn the socket and pull bulb out.
Headlight Bulb
1. Disconnect the two wires from back of headlight.
Note position to reconnect to same terminals.
2. Turn socket to left to disconnect and pull out.
3. Replace the bulb.
4. Align the two tabs and insert socket. Turn to the right
to lock. Terminals will be at 12 o’clock and 6 o’clock
positions.
