4 Connecting to a Windows NT Server 4.0
Windows 95 SR2
Windows 95 SR2 Requirements
• HP Vectra with Windows 95 SR2.
• IBM AUTO LANStreamer PCI card and drivers disk.
• Driver Name for VE7/VE8: Streamer.sys Size: 85KB Date:09/13/96.
• Microsoft Windows NT Server 4.0 machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2 Insert the IBM LANStreamer TR drivers disk (AUTO LANStreamer PCI
Diagnostic Disk) and power on the machine.
3 After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4 Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5 When Windows 95 restarts a message will appear that new hardware has
been found.
6 Insert disk , 4 of 5, IBM Auto LANStreamer driver diskette.
7 Click the “Next” button to begin hardware wizard.
8 Click on “Other Locations” in the “Update Device Driver Location” dialog
box, and set path to “A:\WIN95” then click “OK”
(If you have an HP pre-loaded HDD, set the path statement to
“C:\MASTERS\LANDRV\LNSTRM\DISK4\WIN95\”).
9 “IBM Auto LANStreamer PCI Adapter(NDIS3)” should now be listed.
Click on “Finish.”
10 When prompted to insert the disk labeled “IBM Streamer Family Adapter
Vectra VL8 Vectra VL7 Vectra VE7/VE8
I/O Base Address F800h C800h DC00h
Interrupt Request
Level
11 11 10(11)
